Description
Highlight Features
Next-gen Wi-Fi 6 technology, high concurrency, ultra-fast speed
Intelligent roaming with 802.11k/v/r protocols, smooth roaming experience
PoE and DC power supply, flexible deployment
Ruijie cloud management, intelligent optimization
adio design
Dual-radio
Radio 1: 2.4 GHz, two spatial streams, 2x2 MU-MIMO
Radio 2: 5 GHz, two spatial streams, 2x2 MU-MIMO
Operating frequencies
Radio 1, 802.11b/g/n/ax:
● 2.400 GHz to 2.4835 GHz, ISM
Radio 2, 802.11a/n/ac/ax:
● 5.150 GHz to 5.250 GHz, U-NII-1
● 5.250 GHz to 5.350 GHz, U-NII-2A
● 5.470 GHz to 5.725 GHz, U-NII-2C
● 5.725 GHz to 5.850 GHz, U-NII-3/ISM
Note: Available frequency bands may vary with countries or regions. To use the above-mentioned frequency bands, ensure that they are supported in your country or region. For details, see WLAN Country or Region Codes and Channel Compliance.
Data rates
Combined peak data rate: 1.775 Gbps
2.4 GHz radio, 574 Mbps
● Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to individual 2SS HE40 802.11ax client devices (maximum)
● Two spatial stream Single User (SU) MIMO for up to 287 Mbps wireless data rate to individual 2SS HE20 802.11ax client devices (typical)
5 GHz radio, 1.201 Gbps
● Two spatial stream Single User (SU) MIMO for up to 1.201 Gbps wireless data rate to 2SS HE80 802.11ax client devices (typical)
Data rate set
The following 802.11-compliant data rates in Mbps are supported:
2.4 GHz radio
● 802.11b: 1, 2, 5.5, 11
● 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24 ,36, 48, 54
● 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)
● 802.11ax: 8.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)
5 GHz radio
● 802.11a: 6, 9, 12, 18, 24, 36, 48, 54
● 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)
● 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 4, VHT20 to VHT80)
● 802.11ax: 8.6 to 1,201 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE80)
Packet aggregation
802.11n/ac/ax: A-MPDU and A-MSDU
Antenna type
Built-in omnidirectional antennas (two 2.4 GHz antennas and two 5 GHz antennas)
Antenna gain
2.4 GHz: 2 dBi
5 GHz: 4 dBi
Maximum transmit power
2.4 GHz radio: 26 dBm (23 dBm per chain)
5 GHz radio: 26 dBm (23 dBm per chain)
Note: The transmit power is limited by local regulatory requirements. For details, see WLAN Country or Region Codes and Channel Compliance.
Thailand
2.400 GHz to 2.4835 GHz, EIRP ≤ 20 dBm
5.150 GHz to 5.350 GHz, EIRP ≤ 23 dBm
5.470 GHz to 5.725 GHz. EIRP ≤ 30 dBm
5.725 GHz to 5.825 GHz, EIRP ≤ 30 dBm
Power increment
Configurable based on requirement
Radio technologies
802.11b: Direct-Sequence Spread-Spectrum (DSSS)
802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)
802.11ax: Orthogonal Frequency Division Multiple Access (OFDMA)
Modulation types
802.11b: BPSK, QPSK, CCK
802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM
The following table lists the radio frequency performance of Wi-Fi including different frequency bands, protocols, and date rates. It is country-specific, and Ruijie Networks reserves the right of interpretation.
Wi-Fi Radio Frequency Performance
Frequency Band and Protocol
Data Rate
Maximum Transmit Power per Transmit Chain
Maximum Receive Sensitivity per Receive Chain
2.4 GHz, 802.11b
1 Mbps
23 dBm
–91 dBm
2 Mbps
23 dBm
–91 dBm
5.5 Mbps
23 dBm
–90 dBm
11 Mbps
23 dBm
–87 dBm
2.4 GHz, 802.11g
6 Mbps
23 dBm
–89 dBm
24 Mbps
22 dBm
–82 dBm
36 Mbps
22 dBm
–78 dBm
54 Mbps
20 dBm
–72 dBm
2.4 GHz, 802.11n (HT20)
MCS0
23 dBm
–85 dBm
MCS7
19 dBm
–67 dBm
2.4 GHz, 802.11n (HT40)
MCS0
23 dBm
–82 dBm
MCS7
19 dBm
–64 dBm
2.4 GHz, 802.11ax (HE20)
MCS0
23 dBm
–85 dBm
MCS11
15 dBm
–58 dBm
2.4 GHz, 802.11ax (HE40)
MCS0
23 dBm
–82 dBm
MCS11
15 dBm
–54 dBm
5 GHz, 802.11a
6 Mbps
23 dBm
–89 dBm
24 Mbps
22 dBm
–82 dBm
36 Mbps
22 dBm
–78 dBm
54 Mbps
20 dBm
–72 dBm
5 GHz, 802.11n (HT20)
MCS0
23 dBm
–85 dBm
MCS7
19 dBm
–67 dBm
5 GHz, 802.11n (HT40)
MCS0
23 dBm
–82 dBm
MCS7
19 dBm
–64 dBm
5 GHz, 802.11ac (VHT20)
MCS0
23 dBm
–85 dBm
MCS9
18 dBm
–60 dBm
5 GHz, 802.11ac (VHT40)
MCS0
23 dBm
–82 dBm
MCS9
18 dBm
–57 dBm
5 GHz, 802.11ac (VHT80)
MCS0
23 dBm
–79 dBm
MCS9
18 dBm
–53 dBm
5 GHz, 802.11ax (HE20)
MCS0
23 dBm
–85 dBm
MCS11
16 dBm
–58 dBm
5 GHz, 802.11ax (HE40)
MCS0
23 dBm
–82 dBm
MCS11
16 dBm
–54 dBm
5 GHz, 802.11ax (HE80)
MCS0
23 dBm
–79 dBm
MCS11
16 dBm
–52 dBm
Bluetooth Radio
Bluetooth
Bluetooth 5.1
Antenna type
1 x onboard built-in omnidirectional antenna
Maximum antenna gain
2.4 dBi, with a downtilt angle of roughly 30 degrees
Maximum transmit power
17 dBm (GFSK)
14 dBm (π/4-DQPSK, 8-DPSK)
Receive sensitivity
–95.5 dBm (DH5)
–95 dBm (π/4-DQPSK)
–87.5 dBm (8-DPSK)
Ports Specifications
Fixed service port
1 x 10/100/1000BASE-T port
● In compliance with IEEE 802.3af standard (PoE)
● Auto MDI/MDIX crossover
● PoE-PD: 54 V DC (nominal) 802.3af/at/bt (Class 3 or higher)
● 802.3az EEE
Fixed management port
1 x RJ45 console port (serial console port)
Status LED
1 x multi-color system status LED
Button
1 x Reset button
● Press the button for shorter than 2 seconds. Then the device restarts.
● Press the button for longer than 5 seconds. Then the device restores to factory settings.
Power Supply and Consumption
Input power supply
The AP supports the following two power supply modes:
● 48 V DC/0.3 A power input over DC connector: The DC connector accepts 2.1 mm/5.5 mm center-positive circular plug. A DC power adapter needs to be purchased separately.
● PoE input over PoE-in port: The power source equipment (PSE) complies with IEEE 802.3af standard (PoE).
Note:
● If both DC power and PoE are available, DC power is preferred.
Overall power consumption
Maximum power consumption: 12.95 W
● DC powered: 12.95 W
● PoE powered (802.3af): 12.95 W
● PoE+ powered (802.3at): 12.95 W
● PoE++ powered (802.3bt): 12.95 W
● Idle mode: 6 W
Environment and Reliability
Temperature
Operating temperature: –10°C to +50°C (14°F to 122°F)
Storage Temperature: –40°C to +70°C (–40°F to +158°F)
Note: At an altitude in the range of 3,000–5,000 m (9,842.52–16,404.20 ft.), every time the altitude increases by 220 m (722 ft.), the maximum temperature decreases by 1°C (1.8°F).
Humidity
Operating humidity: 5% RH to 95% RH (non-condensing)
Storage humidity: 5% RH to 95% RH (non-condensing)
Mean Time Between Failure (MTBF)
200,000 hours (22 years) at the operating temperature of 25°C (77°F)
Regulatory Compliance
Security regulations
IEC 62368-1
EN 62368-1
EMC regulations
EN 55032
EN 55035
EN IEC 61000-3-2
EN 61000-3-3
EN 301 489-1
EN 301 489-3
EN 301 489-17
Radio frequency regulations
EN 300 328
EN 301 893
EN 300 440
EN IEC 62311
FCC Part 15
*For more country-specific regulatory information and approvals, contact your local sale agency.
Software Specifications
Applicable Software Version
Applicable software version
AP_RGOS 11.9(6)W1B4 or higher
WLAN
Recommended maximum number of active devices per AP
64 (for HD Video)/120 (for general usage)
Maximum number of associated clients
256
Note
The number of associated clients varies according to the environment.
Maximum number of BSSIDs
32 (up to 16 BSSIDs per radio)
STA management
SSID hiding
Band steering
Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN attributes independently.
Remote intelligent perception technology (RIPT)
Intelligent client identification technology
Intelligent load balancing based on the STA quantity or traffic
STA limiting
SSID-based STA limiting
Radio-based STA limiting
Bandwidth limiting
STA/SSID/AP-based rate limiting
Wireless roaming
Layer 2 and Layer 3 roaming
Security and Authentication
Authentication and encryption
Remote Authentication Dial-In User Service (RADIUS)
PSK, web, 802.1X, PEAP, WPA, WPA2, and WPA3 authentication
SMS authentication (used with the RG-WS series wireless access controller)
MAB authentication (used with the RG-WS series wireless access controller)
WEP (64/128 bits), WPA-Personal, WPA-Enterprise, WPA2-Personal, WPA2-Enterprise, WPA3-Personal (WPA2/WPA3 transition mode), WPA3-Enterprise (CCMP), WPA3-OWE
Data frame filtering
Allowlist, static blocklist, and dynamic blocklist
ACL
Dynamic ACL assignment
● ACL assignment based on time spans
● ACL assignment (complete entry) based on MAC addresses
● Execution of pre-configured ACLs (entry index) based on MAC addresses
CPP
Supported
NFPP
Supported
Routing and Switching
IP service
Static IPv4 address and DHCP-assigned IPv4 address
DHCP Snooping, Option 82, DHCP Server, DHCP Client
Multicast
Multicast-to-unicast conversion
IPv6 basics
IPv6 addressing, Neighbor Discovery (ND), ICMPv6, IPv6 Ping
IPv6 DHCP Client
IP routing
IPv4/IPv6 static routing
VPN
PPPoE Client
IPsec VPN, up to five IPsec tunnels
Management
Network management
Fault inspection and alarm
Information statistics and logging
SNMPv1/v2c/v3
NTP Server and NTP Client
Network management platform
Ruijie Cloud
Web-based management (Eweb)
User access management
Console, Telnet, SSH, SNMP and TFTP-based management
Fat/Fit/Cloud mode switchover
When the AP works in Fit mode, it can be switched to Fat mode through an AC.
When the AP works in Fat mode, it can be switched to Fit mode through the console port or Telnet.
When the AP works in Cloud mode, it can be managed through Ruijie Cloud.
