Description
Highlight Features
Rich port types, 24 x 1GE SFP ports (with eight combo ports), and 8 x 1GE/10GE SFP+ ports for uplink
Hardware redundancy, guaranteed service continuity and network connectivity
VSU virtualization, flexible networking and high reliability
Layer 3 routing control, adaptive to multiple services, efficient and guaranteed data transmission
Network security policies, real-time monitoring, CPP and NFPP, delivering enhanced network robustness
SNMP, RMON, Syslog, USB log backup features, CLI, Eweb, telnet and other management modes, easy network maintenance
Hardware Specifications
| Port Specifications |
RG-CS85-24GT8XS-D |
RG-CS85-24SFP/8GT8XS-D |
RG-CS85-48GT4XS-D |
RG-CS85-48SFP4XS-D |
RG-CS85-48GT4XS-HPD |
| Fixed service port |
24 x 10/100/1000BASE-T ports 8 x 1GE/10GE SFP+ ports |
24 x 1GE SFP ports ā Ports 1 to 16 support the rate of 100Mbps, ports 17 to 24 do not support the rate of 100Mbps ā Ports 1 to 8 are 10/100/1000BASE-T combo ports 8 x 1GE/10GE SFP+ ports |
48 x 10/100/1000BASE-T ports 4 x 1GE/10GE SFP+ ports |
48 x 1GE SFP ports 4 x 1GE/10GE SFP+ ports |
48 x 10/100/1000BASE-T ports, supporting PoE/PoE+ 4 x 1GE/10GE SFP+ ports |
| Module slot |
1 x expansion module slot 2 x power module slots |
1 x expansion module slot 2 x power module slots |
1 x expansion module slot 2 x power module slots |
1 x expansion module slot 2 x power module slots 3 x fan module slots |
1 x expansion module slot 2 x power module slots 2 x fan module slots |
| Expansion module |
CM85-4XS2CQ |
||||
| Power module |
RG-PA150IB-F |
RG-PA150IB-F |
RG-PA150IB-F |
RG-PA150IB-F |
RG-PA600I-P-F RG-PA1000I-P-F |
| Fan module |
/ |
/ |
/ |
M2SFAN I-F (pre-installed 3) |
M2SFAN I-F (pre-installed 2) |
| Module service port |
CM85-4XS2CQ: ā 4 x 1GE/10GE SFP+ ports ā 2 x 40GE/100GE QSFP28 ports |
||||
| Fixed management port |
1 x RJ45 console port 1 x RJ45 MGMT port |
||||
| USB |
1 x USB 3.0 port |
||||
| System Specifications |
RG-CS85-24GT8XS-D |
RG-CS85-24SFP/8GT8XS-D |
RG-CS85-48GT4XS-D |
RG-CS85-48SFP4XS-D |
RG-CS85-48GT4XS-HPD |
| Packet forwarding rate |
512 Mpps |
512 Mpps |
488 Mpps |
488 Mpps |
488 Mpps |
| Switching capacity |
688 Gbps |
688 Gbps |
656 Gbps |
656 Gbps |
656 Gbps |
| CPU |
Dual-core CPU, each core with the clock speed of 1.2 GHz |
||||
| Real-time clock (RTC) |
Supported |
Supported |
Supported |
Supported |
Supported |
| BootROM |
16 MB (2 flash chips for 1+1 boot redundancy) |
||||
| Flash Memory |
4 GB |
||||
| Memory |
1 GB |
1 GB |
1 GB |
2 GB |
2 GB |
| Switch buffer |
4 MB |
||||
| MAC address table size |
64,000 |
||||
| ARP table size |
24,000 |
||||
| Number of IPv4 unicast routes |
24,000 |
||||
| Number of IPv4 multicast routes |
4,000 |
||||
| Number of IPv6 unicast routes |
14,000 |
||||
| Number of IPv6 multicast routes |
2,000 |
||||
| Number of ACEs |
Ingress: 7,000 Egress:1,500 |
||||
| Number of VSU members |
4 |
||||
| Dimensions and Weight |
RG-CS85-24GT8XS-D |
RG-CS85-24SFP/8GT8XS-D |
RG-CS85-48GT4XS-D |
RG-CS85-48SFP4XS-D |
RG-CS85-48GT4XS-HPD |
||
| Unit dimensions (W x D x H) |
440 mm x 340 mm x 44 mm (17.32 in. x 13.39 in. x 1.73 in.) |
442 mm x 420 mm x 43.6 mm (17.40 in. x 16.54 in. x 1.72 in.) |
|||||
| Shipping dimensions (W x D x H) |
593 mm x 497 mm x 192 mm (23.35 in. x 14.57 in. x 7.56 in.) |
563 mm x 563 x mm 210 mm (22.17 in. x 22.17 in. x 8.27 in.) |
|||||
| Rack height |
1 RU |
||||||
| Unit weight |
4.4 kg (9.70 lbs) |
4.3 kg (9.48 lbs) |
4.5 kg (9.92 lbs) |
5.3 kg (11.68 lbs) |
5.7 kg (12.57 lbs) |
||
| Shipping weight |
6.20 kg (13.67 lbs) |
6.62 kg (14.59 lbs) |
6.30 kg (13.89 lbs) |
7.70 kg (16.98 lbs) |
7.80 kg (17.20 lbs) |
||
| Power Supply and Consumption |
RG-CS85-24GT8XS-D |
RG-CS85-24SFP/8GT8XS-D |
RG-CS85-48GT4XS-D |
RG-CS85-48SFP4XS-D |
| Power supply |
2 x pluggable power modules |
|||
| Power module redundancy |
1+1 power redundancy |
|||
| Power module hot swapping |
Supported |
|||
| Power input |
RG-PA150IB-F (AC input): ā Rated input voltage: 100 V AC to 240 V AC, 50 Hz to 60 Hz ā Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz ā Maximum input current: 3 A |
|||
| Maximum output power |
RG-PA150IB-F: 150 W |
|||
| Maximum power consumption |
60 W (excluding expansion modules) 85 W (including expansion modules) |
77 W (excluding expansion modules) 102 W (including expansion modules) |
70 W (excluding expansion modules) 95 W (including expansion modules) |
105W (excluding expansion modules) 125W (including expansion modules) |
| Power Supply and Consumption |
RG-CS85-48GT4XS-HPD |
| Power supply |
2 x pluggable power modules |
| Power module redundancy |
1+1 power redundancy |
| Power input |
RG-PA600I-P-F (AC input): ā Rated input voltage: 100 V AC to 240 V AC, 50 Hz to 60 Hz ā Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz ā Maximum input current: 10 A RG-PA1000I-P-F (AC input 1): ā Rated input voltage: 100 V AC to 130 V AC, 50 Hz to 60 Hz ā Maximum input voltage: 90 V AC to 143 V AC, 47 Hz to 63 Hz ā Maximum input current: 12 A RG-PA1000I-P-F (AC input 2): ā Rated input voltage: 200 V AC to 240 V AC, 50 Hz to 60 Hz ā Maximum input voltage: 180 V AC to 264 V AC, 47 Hz to 63 Hz ā Maximum input current: 8 A |
| Maximum output power |
RG-PA600I-P-F: 600 W RG-PA1000I-P-F: ā 100 V AC to 130 V AC: 930 W ā 200 V AC to 240 V AC: 1000 W |
| Maximum power consumption |
120 W (without PoE) 1,600 W (full PoE load) |
| PoE port |
All RJ45 ports support PoE/PoE+ (IEEE802.3af/at) power supply |
| PoE power cable pairs |
Mode A (1-2, 3-6 pairs) |
| PoE output power |
Each PoE port provides up to 30 W of power, with a maximum power of 1440 W over 48 ports (30 W x 48). The maximum power depends on the configured power supply ā 1 x RG-PA600I-P-F: 370 W ā 2 x RG-PA600I-P-F: 740 W ā 1 x RG-PA1000I-P-F: 740 W ā 2 x RG-PA1000I-P-F: 1480 W, a maximum output of 1440 W over 48 ports (30 W x 48) Note: The maximum number of powered devices supported by the switch is determined by the available power of the switch and the actual power consumption of each device. |
| Energy saving |
Supported |
| Environment and Reliability |
RG-CS85-24GT8XS-D |
RG-CS85-24SFP/8GT8XS-D |
RG-CS85-48GT4XS-D |
RG-CS85-48SFP4XS-D |
RG-CS85-48GT4XS-HPD |
| Temperature |
Operating temperature: 0Ā°C to 45Ā°C (32Ā°F to 113Ā°F) Storage temperature: ā40Ā°C to +70Ā°C (ā40Ā°F to +158Ā°F) |
||||
| Humidity |
Operating humidity: 10% to 90% RH (non-condensing) Storage humidity: 5% to 95% RH (non-condensing) |
||||
| Altitude |
Operating altitude: 0 m to 5,000 m (0 ft. to 16,404.20 ft.) Storage altitude: 0 m to 5,000 m (0 ft. to 16,404.20 ft.) |
||||
| Mean time between failure (MTBF) |
1,051,000 hours (about 120 years) |
823,000 hours (about 94 years) |
963,000 hours (about 110 years) |
788,000 hours (about 90 years) |
832,000 hours (about 95 years) |
| Fan |
3 x fixed fan modules |
3 x fixed fan modules |
3 x fixed fan modules |
3 x pluggable fan modules (pre-installed) |
2 x pluggable fan modules (pre-installed) |
| Heat dissipation |
Fan cooling, left-to-right airflow |
Fan cooling, left-to-right airflow |
Fan cooling, left-to-right airflow |
Fan cooling, front-to-rear airflow |
Fan cooling, front-to-rear airflow |
| Acoustic noise |
45Ā°C (113Ā°F): 56.2 dB |
45Ā°C (113Ā°F): 56.2 dB |
45Ā°C (113Ā°F): 57.9 dB |
45Ā°C (113Ā°F): 56.2 dB |
45Ā°C (113Ā°F): 57.9 dB |
| Power module hot swapping |
Supported |
||||
| USB hot swapping |
Supported |
||||
| Cable hot swapping |
Supported |
||||
| Power supply monitoring |
Monitoring of power supply model and status Power supply failure alarming |
||||
| Fan monitoring |
Fan speed adjustment: 3 levels Fan failure alarming |
||||
| Temperature monitoring |
Temperature monitoring, over-temperature alarming |
||||
| ESD |
ESD Contact/Air Discharge: 6kV/8kV ESD Susceptibility Contact/Air Discharge: 8 kV/15kV |
||||
| Surge protection |
MGMT port: 4 kV Service port: 10 kV Power port: common mode 6 kV, differential mode 6 kV |
||||
| Conformal coating |
Protects circuits against moisture, salt spray, mold, electrical shock and leakage, and so on |
||||
| Certifications and Regulatory Compliance |
RG-CS85-24GT8XS-D |
RG-CS85-24SFP/8GT8XS-D |
RG-CS85-48GT4XS-D |
RG-CS85-48SFP4XS-D |
RG-CS85-48GT4XS-HPD |
| Safety regulation |
IEC 62368-1 |
||||
| EMC regulation |
EN 300386, EN 55032 Class A, EN 55035, EN IEC 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11 |
||||
Software Specifications
| RG-CS85 Series |
|
| Feature |
Description |
| Ethernet switching |
Jumbo frame (maximum length: 9,216 bytes) |
| IEEE 802.1Q (supporting 4K VLANs) |
|
| Voice VLAN |
|
| Super VLAN, Private VLAN |
|
| MAC VLAN, Port based VLAN, Protocol based VLAN, IP-Subnet based VLAN |
|
| GVRP |
|
| Basic QinQ Flexible QinQ |
|
| STP, RSTP, and MSTP |
|
| ERPS (G.8032) |
|
| LLDP/LLDP-MED |
|
| LACP (IEEE 802.3ad) |
|
| IP service |
ARP |
| DHCP client, DHCP relay, and DHCP server |
|
| DHCP snooping |
|
| DNS |
|
| DHCPv6 client and DHCPv6 relay |
|
| DHCPv6 snooping |
|
| Neighbor Discovery (ND) and ND snooping |
|
| IP routing |
Static routing |
| RIP and RIPng |
|
| OSPFv2, OSPFv3, IS-ISv4, ISv4, and IS-ISv6 |
|
| BGP4 and BGP4+ |
|
| IPv4 and IPv6 VRF |
|
| IPv4 and IPv6 PBR |
|
| Multicast |
IGMP v1/v2/v3, and IGMP proxy |
| IGMP v1/v2/v3 snooping |
|
| PIM-DM, PIM-SM, and PIM-SSM |
|
| MSDP |
|
| MLD v1/v2 |
|
| MLD snooping v1/v2 |
|
| PIM-SMv6 and PIM-SSM v6 |
|
| MPLS |
MPLS L3VPN |
| ACL and QoS |
Standard IP ACLs Extended IP ACLs Extended MAC ACLs Time-based ACLs Expert-level ACLs ACL80 IPv6 ACL |
| ACL redirection |
|
| Port traffic rate limiting |
|
| Congestion management: RR, SP, WRR, DRR, WFQ, SP+WRR, SP+DRR, and SP+WFQ |
|
| Congestion avoidance: tail drop, RED, and WRED |
|
| 802.1p/DSCP/ToS traffic classification Eight priority queues per port |
|
| Security |
Multiple AAA modes |
| RADIUS and TACAS+ |
|
| Port-based and MAC-based 802.1x authentication |
|
| Web authentication |
|
| HTTPS |
|
| SSHv1, SSHv2 |
|
| Global IP-MAC binding |
|
| Port isolation and port security |
|
| IP source guard |
|
| SAVI |
|
| CPP and NFPP |
|
| Strict and loose RPF uRPF ignoring default routes |
|
| Reliability |
REUP, RLDP, DLDP |
| IPv4 VRRP v2/v3 and IPv6 VRRP |
|
| BFD |
|
| Link tracing, fault notification, and remote loopback based on 802.3ah (EFM) |
|
| Hot swapping of power modules and cables |
|
| 3-level fan speed adjustment Fan fault alarm |
|
| Device virtualization |
Virtual Switching Unit (VSU) |
| NMS and maintenance |
SPAN, RSPAN, and ERSPAN |
| sFLOW |
|
| NTP and SNTP |
|
| FTP and TFTP |
|
| SNMP v1/v2/v3 |
|
| RMON (1, 2, 3, 9) |
|
| NETCONF |
|
| CWMP (TR-069) standard protocol |
|
| gRPC |
|
| Cloud and SON |
|
| PoE |
IEEE 802.3af and 802.3at Uninterruptible power supply upon hot start Port priority |
